CONE

Quick Reference

See Also

Create a Solid Cone

Creates a 3D solid cone.

Access Methods

Button

Ribbon: Home tab

Modeling panel

ConeNot available on the ribbon in the current workspace

Menu: Home

Modeling

Solid Modeling drop-down

ConeNot available in menus in the current workspace.

Toolbar: Modeling

Summary

Creates a 3D solid with a circular or elliptical base that tapers symmetrically to a point or to a circular or elliptical planar face. You can control the smoothness of 3D curved solids, such as a cone, in a shaded or hidden visual style with the FACETRES system variable.

Use the Top Radius option to create a cone frustum.

Initially, the default base radius is not set to any value. During a drawing session, the default value for the base radius is always the previously entered base radius value for any solid primitive.

List of Prompts

The following prompts are displayed.

Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify a point (1) or enter an option

Specify base radius or [Diameter] <default>: Specify a base radius, enter d to specify a diameter, or press Enter to specify the default base radius value

Specify height or [2Point/Axis endpoint/Top radius] <default>: Specify a height, enter an option, or press Enter to specify the default height value

Center Point of Base

2Point: Specifies that the height of the cone is the distance between the two specified points.
Axis Endpoint: Specifies the endpoint location for the cone axis. The axis endpoint is the top point of the cone or the center point of the top face of the cone frustum (Top Radius option). The axis endpoint can be located anywhere in 3D space. The axis endpoint defines the length and orientation of the cone.
Top Radius: Specifies the top radius of the cone, creating a cone frustum.

Initially, the default top radius is not set to any value. During a drawing session, the default value for the top radius is always the previously entered top radius value for any solid primitive.
Diameter: Specifies the diameter for the base of the cone.

Initially, the default diameter is not set to any value. During a drawing session, the default value for the diameter is always the previously entered diameter value for any solid primitive.

3P (Three Points)

Defines the base circumference and base plane of the cone by specifying three points.

2P (Two Points)

Defines the base diameter of the cone by specifying two points.

TTR (Tangent, Tangent, Radius)

Defines the base of the cone with a specified radius tangent to two objects.

Sometimes, more than one base matches the specified criteria. The program draws the base of the specified radius whose tangent points are closest to the selected points.

Elliptical

Specifies an elliptical base for the cone.

Center: Creates the base of the cone by using a specified center point.